Home  | About Us  |  Printers  |  Service  |  Leasing  |  Supplies  |  E-Mail Us


 
 

Printek FormsPro 4000 Series
300 - 530 cps forms printers

The FormsPro 4000 Series printers can solve your toughest printing problems and automate most paper handling functions.  With the FormsPro 4300, 4500se, and 4503, you'll print with greater legibility and unsurpassed reliability

Detailed Printer Specifications

Print Modes

8000se/8003se

4500se/4503se

     Fast Draft
800 cps
530 cps

     Draft
600 cps
400 cps

     Fast Draft/High Impact
400 cps
265 cps

     High Impact
300 cps
200 cps

     Letter Quality
150 cps
100 cps

     Optical Quality
100 cps
65 cps

     Graphics
28,800 dps
15,360 dps

Printhead
18-wire parallel
18-wire parallel

Paper Slew Rate
16 ips,
with slower rates
user-selectable for
difficult forms.
12 ips,
with slower rates
user-selectable for
difficult forms.

Multi-part Forms
1 to 6 parts
1 to 9 parts

.
0.025" max. thickness
0.025" max. thickness

Audible Noise
(Draft Mode)
55 dBA
62 dBA

Operator Indicators
LED for Online and Setup
LEDs for power, Online and Fault

.
2x16 LCD for form selection
2x16 LCD for form selection

.
On/Off line status and error descriptions
On/off line status and error descriptions

Standard Interfaces

 . .

     Parallel
Centronics compatible
Centronics compatible

     Serial
RS232, 100-9,60 baud
RS232, 300-9,600 baud

Physical Specifications

    

     (H x W x D)
11.8" x 26.25" x 20.5"
9.5" x 25" x 20.3"

.
(30cm x 66cm x 52cm)
(24cm x 63.5cs x 51.5cm)

     (Weight)
53 lbs. (24kg)
43 lbs. (19.5kg)

Special Features
Horizontal print fine adjustment.
Horizontal print fine adjustment.

 
Ability to name forms
(i.e., "Invoice")
for operator display.
Ability to name forms
(i.e., "Invoice")
for operator display.
     

FormsPro 4000se Series Printers

530 cps forms printers

The FormsPro 4000se Series printers can solve your toughest printing problems and automate most paper handling functions.  With the FormsPro 4500se, and 4503se, you'll print with greater legibility and unsurpassed reliability.

FP4000se Features

Set IP address from the front panel

Remote printer setup

Firmware flash upgradeable

802.11b wireless ethernet interface available as an option

Genicom ANSI emulation

Increased available memory

Two-line display

Auto-switching power supply — can work domestically and internationally, and it weighs less!

Tractor System.   The FormsPro 4500se has a single set of straight-up tractors.  The FormsPro 4503se has the Tri-Trak System with three sets of straight-through tractors.

High-Speed for High-Volume Printing.  With a draft speed up to 530 cps, FormsPro printers can print a typical 1,000 character document in less than five seconds.  That's over 700 documents per hour!

Waste-Free Forms Tear-Off.   After you tear off a form, the next is automatically positioned for printing.

Superior Legibility-Even on 9-Part Forms.  Auto-Gap feature adjusts the printhead according to form thickness.

Trouble-Free Forms Handling.   Easy-Load tilt-up top simplifies loading, and straight-up paper path eliminates the problem of forms buckling and jamming.  Paper jam sensor permits reliable, unattended operation.

Automatic Page Edge Sensor.   Optical sensor prevents printhead from printing beyond the edges of the loaded form.

Stores Parameters for Up to 10 Forms.  Spacing, margins, font and 11 other parameters are set using four front panel buttons.  Options are displayed on a 2x16-character LCD display.  Once you've set the parameters for a form, they can be stored and recalled at any time.

Ruggedly Built for Reliable Operation. FormsPro printers are designed to withstand 100% duty cycles.   The printhead carries a two-year limited warranty when used in combination with a Printek brand ribbon - longer than any printhead in the industry.  A one-year warranty is offered if a non-Printek brand ribbon is used.